H/V criteria

This forum is dedicated to discuss all problems and suggestions related to the use of geopsy database and its plugins (array processing, H/V,...).
igs
Posts: 1
Joined: Fri Apr 20, 2012 7:28 am

H/V criteria

Postby igs » Mon Apr 23, 2012 9:03 am

Hi, I'm working with H/V tool and I need, please, some explanation about the fourth criterion of clarity: I can calculate the f_peak value (A_H/V +/- sigma_A) as difference between the peak frequency of the dashed curve and the peak frequency of the continue curve?

Thank you and best regards

riccardo
Posts: 34
Joined: Fri Aug 06, 2010 4:37 pm
Location: Pisa

Re: H/V criteria

Postby riccardo » Thu Apr 26, 2012 3:13 pm

Hi igs
no, the max curve is (aver*st.dev) and the min curve is (aver/st.dev)

viewtopic.php?f=2&t=181

I'm also working on it.
I have prepeared a spreadsheet with OpenOffice calc, but I'm still testing it

walo
Posts: 3
Joined: Sat Jun 02, 2012 12:57 am

Re: H/V criteria

Postby walo » Thu Jun 28, 2012 3:55 am

Hi Marc

thanks for developing the program, is very good, but the possibility exists that the program calculates the geometric combination of the horizontal components, besides the quadratic and the other that comes by default?

I ask this because the project SESAME recommends such combination, however, I would appreciate much any comments, I used the program but did not perform well JSesame,
regards

Walter

admin
Site Admin
Posts: 412
Joined: Mon Aug 13, 2007 11:48 am
Location: ISTerre
Contact:

Re: H/V criteria

Postby admin » Mon Jul 02, 2012 11:44 am

Under the second tab (H/V toolbox), under the section "Horizontal components" you can switch to "Total horizontal energy" which is the geometric combination of horizontal components. SESAME mostly used the "Squared average".

vince
Posts: 4
Joined: Wed Mar 06, 2013 3:37 pm

Re: H/V criteria

Postby vince » Mon Mar 11, 2013 3:39 pm

Hi all,
Could anybody explain how to check the IV criteria for Clear Peak with the data coming out from H/V analysis in Geopsy? Numerical example?

thank you,
vince

massimo
Posts: 6
Joined: Sun Dec 18, 2011 2:13 pm
Location: Troghi - Firenze

Re: H/V criteria

Postby massimo » Sun Mar 24, 2013 6:42 pm

ciao,
I use this file to verify the criteria sesame by output geopsyhv.
The file is still in the experimental stage, advice and recommendations are welcome
massimo
Attachments
HV.xls
(53 KiB) Downloaded 401 times


Return to “Geopsy usage”

Who is online

Users browsing this forum: No registered users and 1 guest