Page 1 of 1
[SOLVED] how to paste passive signal?
Posted: Mon Oct 31, 2011 11:56 am
by riccardo
Good morning
I have a sismograph that can take only 4096 samples, so the passive f-k metod for time period longer than 30" with 125 Hz is impossible.
Is it possible with Geopsy paste/merge two .SU files in one file?
Re: [SOLVED] how to paste passive signal?
Posted: Wed Nov 09, 2011 1:56 pm
by admin
There is no need to merge various segments of recordings. Just provide the same station name for all segments with correct starting and ending time. The FK processing will jump from one section to the next
Re: [SOLVED] how to paste passive signal?
Posted: Wed Nov 09, 2011 2:44 pm
by riccardo
thank you MArk
Is it possible to use the dinver with f-k linear passive tool output *.max
Re: [SOLVED] how to paste passive signal?
Posted: Wed Nov 09, 2011 2:48 pm
by admin
.max files are to be pre-processed by max2curve before proceeding to the inversion step.
Re: [SOLVED] how to paste passive signal?
Posted: Wed Nov 09, 2011 3:22 pm
by riccardo
max2curve is very criptic !!!
Re: [SOLVED] how to paste passive signal?
Posted: Thu Nov 10, 2011 8:55 am
by admin
It might be at first glance. If you are not used to array processing, you'd better read this
http://www.geopsy.org/wiki/index.php/FK ... utput_file about the .max format and explanations about max2curve process.