Gpsh

Synopsis

gpsh [OPTIONS] [FILE]

Description

Computes the SH transfer function for layered models given through stdin or FILE.

The input is the soil column defined as listed below] The output is the Fourier transfer function for VERTICALLY INCIDENT plane S waves

Format for layered models:

 Line 1  : <number of layers n including half-space for first model>
 Line 2  : <thickness (m)> <Vp (m/s)> <Vs (m/s)> <Density (kg/m3)>[ <Qp> <Qs>]
 ....
 Line n+1 : 0 <Vp (m/s)> <Vs (m/s)> <Density (kg/m3)>[ <Qp> <Qs>]
 Line n+2 : <number of layers m including half-space for a second model - if wished>
 Line n+3 : <thickness (m)> <Vp (m/s)> <Vs (m/s)> <Density (kg/m3)>[ <Qp> <Qs>]
 ....
 Line n+m+2 : 0 <Vp (m/s)> <Vs (m/s)> <Density (kg/m3)>[ <Qp> <Qs>]
 Line n+m+3 : <number of layers l including half-space for a third model - if wished>
 ....

Quality factors are mandatory. Any number of models can be given as input.

Gpsh options

• -n <count> Number of samples (default=100)
• -max <max> Maximum of range for transfer function (default=20)
• -angle <angle> Incidence angle (default=90, vertical incidence)

Generic options:

• -help <SECTION> Show help about options. SECTION may be empty or:

                           all, examples, generic, gpsh

• -version Show version information
• -app-version Show short version information
• -reportbug Start bug report dialog, information about bug is

                           passed through stdin. This option is used
                           internally to report bugs if option -nobugreport is
                           not specified.

• -reportint Start bug report dialog, information about

                           interruption is passed through stdin. This option
                           is used internally to report interruptions if
                           option -nobugreport is not specified.

• -nobugreport Do not generate bug report in case of error

Examples

        gpsh < test.model

 Calculate SH transfer function from 0.2 Hz to 20 Hz for model 'test.model'.

        gpsh < test.model | figue -c

 Calculate the same function and plot it.

        gpsh < test.model | figue -c -m sh.mkup

 Show the same function on a log-log plot. 'sh.mkup' is a tar.gz file
 containing an xml description of the graphic format, it can be generated from
 figue's interface.

Copyright

Copyright (c) 2002-2008 Marc Wathelet. All rights reserved. See http://www.geopsy.org for more information.